? ?高壓消防水泵巡檢控制設備
??????高壓水泵巡檢控制設備，一般應用在采用高壓電機驅動的水泵巡檢過程中。 隨著我國工業水平的快速發展，一些大型企業消防泵站大多選用了6-10KV的中壓電機作為水泵的驅動動力。因此，對于大功率、高電壓的電動機，配備專用的高壓啟動設備----高壓巡檢柜?，成為了一種需求。北京東方神龍環保設備制造有限公司對于高壓電機水泵控制與自動巡檢系統，已具有成熟可靠的方案和生產能力，并取得高壓聯絡柜檢驗報告和諧波檢驗報告。高壓巡檢柜保證長期處于非運行狀態的消防水泵得到日常巡檢維護，確保消防水泵的可靠運行。
??????目前，我公司在高壓消防泵聯動控制柜采用采用帶儲能式的高壓真空斷路器配合KYN28柜實現高壓消防泵的聯動控制，既可以實現各種遠程啟泵，也可實現就地啟泵同時還能滿足GB50974-2014中消防機械應急啟泵的要求。

? ? ? 生產制造依據標準及規范:
??????GB50974- 2014《消防給水及消火栓系統技術規范》條文“11控制與操作”之規定，
??????GB16927.1-1997《高電壓試驗技術 第一部分:一?般試輸要求》；

? ? ? GB3906?2006?《3.6-?40?.5KV金屬封閉開關設備和控制設備》；

? ? ? GB/T11022- 1999《高壓開關設備和控制沒備標準的共同技術要求》；

? ? ? IEC60694:?1996《高壓開關設備和控制設備的通用技術要求》。

??????High pressure fire pump inspection control equipment
? ? ? High pressure water pump inspection control equipment is generally used in the inspection process of water pump driven by high pressure motor. With the rapid development of China's industrial level, most of the fire pump stations in some large enterprises choose 6-10KV medium voltage motor as the driving power of the pump. Therefore, for high-power, high-voltage motors, equipped with special high-voltage starting equipment - high-voltage inspection cabinet, has become a demand. Beijing Dongfang Shenlong environmental protection equipment manufacturing Co., Ltd. has a mature and reliable scheme and production capacity for the control and automatic inspection system of high-voltage motor water pump, and has obtained the inspection report of high-voltage contact cabinet and harmonic inspection report. The high-pressure inspection cabinet ensures the daily inspection and maintenance of the fire pump in the non operating state for a long time, and ensures the reliable operation of the fire pump.
? ? ?At present, our company adopts high-pressure vacuum circuit breaker with energy storage type and kyn28 cabinet to realize the linkage control of high-pressure fire pump in the linkage control cabinet of high-pressure fire pump, which can not only realize the remote start of various pumps, but also realize the local start of pumps and meet the requirements of emergency start of fire engines in gb50974-2014.
? ? ?Production and manufacturing standards and specifications:
Article "11 control and operation" of GB50974-2014 technical code for fire water supply and hydrant system,
Gb16927.1-1997 high voltage test technology Part 1: General test requirements;
GB3906 2006 3.6-40.5KV metal enclosed switchgear and control equipment;
GB / t11022-1999 common technical requirements of standards for high voltage switchgear and control equipment;
Iec60694: 1996 general technical requirements for high voltage switchgear and control equipment.